What is the Typical Cost of a Metal Roof in Great Falls?

The cost of installing a new metal roof in Great Falls can range from $7,000 to $35,000, depending on the size of your rooftop and the metal type you install. A metal roofing installation per square foot costs about $7.00 to $10.00. The installation costs of your preferred Great Falls roofing contractor may also impact your total cost.

The Cost Of Metal Roofing In Great Falls

Below we’ve provided you with a guide on how much you can expect to pay for metal roof installation in the Great Falls area.

This is how much you can expect to pay for your Great Falls roof line:

• 1,000 sf. roof / 10 squares = $7,000 to $10,000
• 1,500 sf. roof / 15 squares = $10,500 to $15,000
• 2,000 sf. roof / 20 squares = $14,000 to $20,000
• 2,500 sf. roof / 25 squares = $17,500 to $25,000
• 3,000 sf. roof / 30 squares = $21,000 to $30,000
• 3,500 sf. roof / 35 squares = $24,500 to $35,000

Request a quote to receive a more accurate estimate for your metal roof installation.

Here you’ll find some details on the types of metal that you can install on your rooftop:

Corrugated Metal Roofing

• Galvanized steel rolled into a pattern.
• The most popular styles of corrugated metal are U-panel and R-panel.
• Patterns may vary, corrugated metal is stacked like tile.
• Corrugation runs perpendicular to steel grooves to enhance strength.
• Corrugated metal is prefabricated and cost-effective.
• Lightweight, corrosion-resistant, durable, and easily transported.
• Directs water off of your roof.

PBR

• High-quality, versatile metal roof panel.
• Larger overlap section that creates stronger metal-to-metal contact and weather-tight panels.
• Ideal for low slope applications.
• High quality with ease of installation.
• Low-maintenance and durable.
• Adds extra protection against the elements by sealing out moisture and wind.

Standing-Seam Metal Roofing

• Come in snap-lock, mechanical lock, and batten panel seal types.
• Each seal type provides different protection.
• Choose a specific seam type based on climate to protect your building.
• Seams stand up higher than the roof itself due to interlocking panels.
• Aesthetic standing seam also protects the fasteners.
• Wide range of colors, lengths, widths, thicknesses, and seam types offered.
• Durable and cost-effective.

Tuff Rib Roofing

• Economical, structural, light gauge through-fastener roof and wall panel.
• Excellent choice for commercial, industrial, and agricultural applications.
• Manufactured with high tensile steel to allow for greater load capability.
• Jack-of-all-trades for metal roofing, siding, and modern accents.
• Built to last and stands up to wind, hail, snow, and rain.

The Pros and Cons of A New Metal Roof

We understand that the roof you choose for your home or business is an important decision. Below you’ll find some points to consider to inform your choice better.

Pros Of Metal Roofing

• Durability: You can count on metal roofs to withstand the elements—including gusts of wind up to 140 miles per hour—and not corrode or crack thanks to rust-proof coatings.
• Longevity: A properly installed metal roof will last as long as the house, with an expected lifespan of 40 to 70 years and, often. (By contrast, traditional asphalt roofing typically lasts 12 to 20 years.)
• Sustainability: Metal roofs can be fully recycled at the end of its service life, with materials such as steel able to do so without losing strength or durability.

Cons Of Metal Roofing

• Noisy: Unless sheathed or insulated, (which can add to the total cost of your roof) metal roofing can add increasing noise to your home, particularly during rain and thunderstorms.
• Upfront Costs: Higher-end metal roofing materials can run over 10 times the cost of asphalt, and that’s not taking installation costs into account.

Have questions about whether or not a metal roof is right for your home? Are you ready to start your Great Falls home’s new metal roof installation? Don’t delay, give A-1 Contractors, Inc. a call today!